Brown Dress Belt by Nickel Smart™
<b>Overview<b>
A versatile belt with clean, classic lines. A single stitch refines and accentuates the comfortable strap.
The clamp pin buckle is nickel free; the base metal and finish are Certified Nickel Free™ and guaranteed to never cause a nickel allergy rash.
Even better, this belt features our clamp-pin buckle with an aggressive hold. With this buckle, you can easily trim the 44" strap to your perfect size then clamp on the buckle. (Directions are included with the belt shipment and on the third tab.)
No worries about sizing and no worries about nickel! Please note: Maximum size is 44 inches.
Love this belt, but need it in black? It's available - the Black Dress Belt!
How about one of each? Order the two-belt set - Dress Black and Brown Combo!
<b>Details<b>
Buckle:
- Certified Nickel Free™ - guaranteed to never test positive for nickel!
- Dimensions: 3 inches long x 1¾ inches wide x ⅝" height (with keeper) or 72 mm x 44 mm x 16 mm
- Finish: Brushed satin
- Material: Zinc
- Hypoallergenic
- Clamp Pin Buckle by Nickel Smart™
Strap:
- Color(s): Brown
- Width: 1⅜ inches or 35 mm wide
- Trim-to-fit belt strap has a maximum size of 44 inches (112 cm)
- Material: Top Grain Leather upper/Split Grain Leather back
Product ID: 4102
<b>Trim to Fit<b>
How to trim your Nickel Free Nickel Smart™ Dress Belt
To size your trim-to-fit belt, simply unclamp the buckle by lifting the tab (or lever) on the back side of the buckle. This will release the belt strap, allowing you to remove it from the clamp pin buckle. See illustration below:
To determine the perfect size, we recommend watching our educational video on belt sizing. If you are in a hurry and need to size the belt now, then measure your waist through your belt loops using a tape measure. The resulting number of inches or centimeters* is your belt size. From the middle hole of your new belt, measure out the number of inches or centimeters of your belt size. This is the point where you will cut the belt. If your belt size is 34 inches, there should be this length between the middle hole and the end of the belt where you will make your cut. Mark the strap and double check your measurements before proceeding.
Use sharp scissors and cut through the belt strap at the marked spot.
Slide the clamp pin buckle onto the cut strap and press the tab firmly into the strap. Once the buckle is clamped into place, your belt is ready to wear!
We are here to help! Please let us know if you need additional assistance: Info@NoNickel.com or 704-947-1917.
*An inches to centimeters conversion chart can be found at the bottom of our Sizing Tips page.
